OEM Customized Insulating Material Used In Boiler - Mullite light-weight insulation bricks – MINYE
OEM Customized Insulating Material Used In Boiler - Mullite light-weight insulation bricks – MINYE Detail:
Product Description
The light weight mullite bricks contains high porosity, which can save more heat and therefore reduces the cost of fuel. Meanwhile the light weight means less heat storage capacity, so less time is required when the kiln is heated or cooled. Faster periodic operation is workable.
It can be applied at the temperature range from 900 to 1600 ℃.
It is mainly used as kiln lining in high temperature(less than 1700 ℃) kilns of ceramics, petrochemical, metallurgy and machinery.
Typical Features
Low thermal conductivity, low heat capacity, low impurity content
High strength, excellent thermal shock resistance, erosion resistance
Accurate dimension
Typical Application
Ceramics roller kiln and shuttle kiln: standard brick, roller passage hole brick, hanger brick,
Metallurgy industry: hot blast furnace; inner lining of foundry kilns
Power industry: power generation and fluidised bed equipment
Electrolytic Aluminium industry: kiln inner lining
Typical product properties
|
Mullite light-weight insulation bricks Product Properties |
||||||
| Product Code | MYJM-23 | MYJM-26 | MYJM-28 | MYJM-30 | MYJM-32 | |
| Classification Temperature (℃) | 1260 | 1400 | 1500 | 1550 | 1600 | |
| Density (g/cm³) | 550 | 800 | 900 | 1000 | 1100 | |
| Permanent linear thrinkage (℃×8h) | 0.3 (1260) | 0.4 (1400) | 0.6 (1500) | 0.6 (1550) | 0.6 (1600) | |
| compressive strength(Mpa) | 1.1 | 1.9 | 2.5 | 2.8 | 3 | |
| Repture strength(Mpa) | 0.8 | 1.2 | 1.4 | 1.6 | 1.8 | |
| Thermal conductivity (W/m.k) (350℃) | 0.15 | 0.26 | 0.33 | 0.38 | 0.43 | |
| Chemical composition (%) | Al2O3 | 40 | 54 | 62 | 74 | 80 |
| Fe2O3 | 1.2 | 0.9 | 0.8 | 0.7 | 0.5 | |
| Note: Test data shown are average results of tests conducted under standard procedures and are subject to variation. Results should not be used for specification purposes. The products listed comply to ASTM C892. | ||||||
Product detail pictures:
Related Product Guide:
To continuously increase the administration process by virtue of the rule of "sincerely, good religion and excellent are the base of company development", we commonly absorb the essence of linked goods internationally, and continually build new solutions to fulfill the requires of shoppers for OEM Customized Insulating Material Used In Boiler - Mullite light-weight insulation bricks – MINYE , The product will supply to all over the world, such as: Latvia, Malaysia, Gambia, Please feel cost-free to send us your specifications and we'll respond to you asap. We've got a professional engineering team to serve for the every single detailed needs. Free samples may be sent for you personally to know far more facts. So that you can meet your desires, please really feel cost-free to contact us. You could send us emails and call us straight. Additionally, we welcome visits to our factory from all over the world for much better recognizing of our corporation. nd merchandise. In our trade with merchants of several countries, we often adhere to the principle of equality and mutual advantage. It is our hope to market, by joint efforts, both trade and friendship to our mutual benefit. We look forward to getting your inquiries.
By Linda from Mecca - 2018.09.19 18:37
This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately， we successfully completed the procurement tasks.
By Antonio from Serbia - 2018.06.12 16:22
