Product

OEM Supply Fire Rating Ductwork - Mullite light-weight insulation bricks – MINYE


Product Detail

Product Tags

Related Video

Feedback (2)

Often customer-oriented, and it's our ultimate target to become not only probably the most reputable, trustable and honest provider, but also the partner for our customers for Firebrick Temperature Rating, Fire Resistant Duct, Large Firebrick, We glance forward to receiving your enquires shortly and hope to have the opportunity to function along with you inside the future. Welcome to acquire a glimpse at our organization.
OEM Supply Fire Rating Ductwork - Mullite light-weight insulation bricks – MINYE Detail:

Product Description

The light weight mullite bricks contains high porosity, which can save more heat and therefore reduces the cost of fuel. Meanwhile the light weight means less heat storage capacity, so less time is required when the kiln is heated or cooled. Faster periodic operation is workable.
It can be applied at the temperature range from 900 to 1600 ℃.
It is mainly used as kiln lining in high temperature(less than 1700 ℃) kilns of ceramics, petrochemical, metallurgy and machinery.

Typical Features

Low thermal conductivity, low heat capacity, low impurity content
High strength, excellent thermal shock resistance, erosion resistance
Accurate dimension

Typical Application

Ceramics roller kiln and shuttle kiln: standard brick, roller passage hole brick, hanger brick,
Metallurgy industry: hot blast furnace; inner lining of foundry kilns
Power industry: power generation and fluidised bed equipment
Electrolytic Aluminium industry: kiln inner lining

Typical product properties

Mullite light-weight insulation bricks Product Properties

Product Code MYJM-23 MYJM-26 MYJM-28 MYJM-30 MYJM-32
Classification Temperature (℃) 1260 1400 1500 1550 1600
Density (g/cm³) 550 800 900 1000 1100
Permanent linear thrinkage (℃×8h) 0.3 (1260) 0.4 (1400) 0.6 (1500) 0.6 (1550) 0.6 (1600)
compressive strength(Mpa) 1.1 1.9 2.5 2.8 3
Repture strength(Mpa) 0.8 1.2 1.4 1.6 1.8
Thermal conductivity (W/m.k) (350℃) 0.15 0.26 0.33 0.38 0.43
Chemical composition (%) Al2O3 40 54 62 74 80
Fe2O3 1.2 0.9 0.8 0.7 0.5
Note: Test data shown are average results of tests conducted under standard procedures and are subject to variation. Results should not be used for specification purposes. The products listed comply to ASTM C892.

Product detail pictures:


Related Product Guide:

We have been proud from the higher consumer gratification and wide acceptance due to our persistent pursuit of high quality both on product or service and service for OEM Supply Fire Rating Ductwork - Mullite light-weight insulation bricks – MINYE , The product will supply to all over the world, such as: Bangladesh, Palestine, Moscow, All our staffs believe that: Quality builds today and service creates future. We know that good quality and the best service are the only way for us to achieve our customers and to achieve ourselves too. We welcome customers all over the word to contact us for future business relationships. Our products are the best. Once Selected, Perfect Forever!
The customer service reprersentative explained very detailed, service attitude is very good, reply is very timely and comprehensive, a happy communication! We hope to have a opportunity to cooperate.
5 Stars By Dinah from Mozambique - 2018.06.30 17:29
Wide range, good quality, reasonable prices and good service, advanced equipment, excellent talents and continuously strengthened technology forces,a nice business partner.
5 Stars By Belinda from Kuwait - 2018.12.22 12:52
Write your message here and send it to us